I'm finally up to date on all work, except some translations for the documents are not yet done. Of course there is more shipping to be done for roulette computers, but I've done all I can do and am waiting on more stock.
Again just a reminder not to send me spins until about 15th September.
You can still contact me via email (and mobile phone if urgent), but please keep emails short, direct and clear so I can quickly get through them while I'm away. Again if emails are long and indirect, I tend to skip over them and address shorter ones first so I can help more people in less time.
Friday, August 26, 2011
Hybrid V3 Roulette Computer Progress
The developers working on the hybrid v3 have completed the proof of concept component for the most difficult part, so full development can proceed with confidence because the rest is comparatively simple. However, entire development is bit more expensive than anticipated. They estimate full completion will be in approximately 3-4 months but as with such complex projects, completion times are uncertain.
The current equivalent model of this hybrid needs 3 players to be practical, and it requires a close-up view of the wheel. For the V3 model under development, the video footage can be much smaller with poorer quality.
Testing has indicated we cannot realistically create a model suitable for SINGLE players. This is purely because all parts will be too large to be bodyworn by a single person. But being able to use just 2 players will be easily achieved. Neither players require skill or knowledge beyond basic betting.
As the hard part has been done, now it's a matter of putting each module together. At this stage we have started building 5 units (the hardware), of which 3 have been allocated, leaving 2 remaining. To purchase one of these, $30,000 deposit must be paid to secure the purchase (first come first served). Upon completion, the balance is to be paid in-person when the unit is demonstrated. For this you MUST visit me in person because it is not a small purchase, and I want to make it perfectly clear what you are purchasing. It is possible to do live webcam demos but in-person is preferred. Essentially you will see:
The current equivalent model of this hybrid needs 3 players to be practical, and it requires a close-up view of the wheel. For the V3 model under development, the video footage can be much smaller with poorer quality.
Testing has indicated we cannot realistically create a model suitable for SINGLE players. This is purely because all parts will be too large to be bodyworn by a single person. But being able to use just 2 players will be easily achieved. Neither players require skill or knowledge beyond basic betting.
As the hard part has been done, now it's a matter of putting each module together. At this stage we have started building 5 units (the hardware), of which 3 have been allocated, leaving 2 remaining. To purchase one of these, $30,000 deposit must be paid to secure the purchase (first come first served). Upon completion, the balance is to be paid in-person when the unit is demonstrated. For this you MUST visit me in person because it is not a small purchase, and I want to make it perfectly clear what you are purchasing. It is possible to do live webcam demos but in-person is preferred. Essentially you will see:
- Reliable automated predictions from video footage
- The camera used is covert and bodyworn and can be freely moved around during the prediction process
- How the device knows when view of the wheel is obstructed
- How the wireless components avoid detection
- All processes required for accurate prediction and betting
Monday, August 22, 2011
IMPORTANT: Away for 2 weeks
I'll be away from 26th August to 12th September. During this time, I will still have internet access, but will be only to respond to higher priority emails. Before I leave, I will be up to date on all spin analysis and emails. But please do NOT request further spin analysis from now until about 15th September.
Before I leave, I will be shipping as many roulette computers as I can. I do not have the stock to supply everyone before I leave, so some people will have to wait until I return. If you are a purchaser and are one of these people, I will compensate you with free equipment such as extra earpieces and induction loops.
I will still be contactable by mobile phone (sms or calls) in case of emergencies. But please, actual emergencies only.
If you need to contact me, please do so via email and keep questions/concerns short, clear and direct. The easier you make it for me, the quicker I can respond to everyone. If you send me a long unclear email, I will temporarily skip over it and address quicker emails so I can help more people in less time.
I understand my absence and unfinished work is inconvenient for some people. But please understand I am very busy 50 weeks of the year, and this 2 weeks is my time to not be busy. When I return, there is always a huge backlog of work which will take me about a week to catch up on, so don't expect things to be complete the instant I return. Rest assured when I return, everything that needs to be done will be done asap.
Before I leave, I will be shipping as many roulette computers as I can. I do not have the stock to supply everyone before I leave, so some people will have to wait until I return. If you are a purchaser and are one of these people, I will compensate you with free equipment such as extra earpieces and induction loops.
I will still be contactable by mobile phone (sms or calls) in case of emergencies. But please, actual emergencies only.
If you need to contact me, please do so via email and keep questions/concerns short, clear and direct. The easier you make it for me, the quicker I can respond to everyone. If you send me a long unclear email, I will temporarily skip over it and address quicker emails so I can help more people in less time.
I understand my absence and unfinished work is inconvenient for some people. But please understand I am very busy 50 weeks of the year, and this 2 weeks is my time to not be busy. When I return, there is always a huge backlog of work which will take me about a week to catch up on, so don't expect things to be complete the instant I return. Rest assured when I return, everything that needs to be done will be done asap.
Thursday, August 18, 2011
Wheel analysis software
There are a few minor updates being done to the wheel analysis software - nothing major, but they make application easier. When they're done (few days), I'll create a video of typical use which will be easier to follow than written instructions. I expect the video to be done some time next week.
I'll be away for 2 weeks from late August - early September. Before I leave, everything needs to be done including computer shipping, spin analysis etc so I'll be even busier than normal. PLEASE keep emails short, clear and to the point to save me time.
I'll be away for 2 weeks from late August - early September. Before I leave, everything needs to be done including computer shipping, spin analysis etc so I'll be even busier than normal. PLEASE keep emails short, clear and to the point to save me time.
Tuesday, August 16, 2011
Roulette wheel analysis software - update complete
The changes to the software have now been applied. I haven't fully tested them yet though, but will soon. Although initial testing seems perfect. I'll do full testing when I next analyze spins (likely tomorrow).
The instructions are also now updated, and can be downloaded from the same location.
Ultimately the main change is that you can select MULTIPLE filter options by holding CTRL on your keyboard, and selecting whatever filter items you want. This just saves you a lot of time and works more like the excel document.
The instructions are also now updated, and can be downloaded from the same location.
Ultimately the main change is that you can select MULTIPLE filter options by holding CTRL on your keyboard, and selecting whatever filter items you want. This just saves you a lot of time and works more like the excel document.
Online wheel analysis software
The programmer appears to have finished the updates, and will apply them to the player server. Once it's applied, I'll test fully and update the instructions to explain the changes.
Friday, August 12, 2011
Spin analysis, compute shipping, software access etc
All emails have now been answered (except those only just received), all software access also given. All ebook access given too, except for some translations into other languages that are not yet done.
There are just a few sets of spins I haven't analyzed yet, but will get to them asap. I don't think I have time left for today though.
I've prepared 4 packages for shipping (roulette computers) and will ship monday. Again I'm slowly but surely getting through everything.
There are just a few sets of spins I haven't analyzed yet, but will get to them asap. I don't think I have time left for today though.
I've prepared 4 packages for shipping (roulette computers) and will ship monday. Again I'm slowly but surely getting through everything.
Friday, August 5, 2011
Roulette Computers, Online Wheel Analysis Software & Mobile Phone Wheel Analysis
Roulette Computer (Uber): After painfully tedious testing, an issue I thought was a bug wasn't a bug after all. It wasn't all wasted time though as I found a way to get a 2% accuracy increase. Not much, but better to have it than not. As it's Friday now, I'm finishing work for the week and on Monday will do one more complete test to make sure it's all perfect, then on TUESDAY will resume shipping. You will be notified just before I ship.
Roulette Computers (Basic): For players who purchased the system with the free basic computer hardware, these will be shipped shortly. A few more than expected became players at that stage, so I MAY be a bit short on stock, which means some orders will be delayed about 2-3 weeks while I obtain more. But keep in mind you can download the actual SOFTWARE from the player only forum (www.genuinewinner.com/forum) and test on footage from my sites - install it on virtually any mobile phone. Don't expect to go out and play the first day anyway. First thoroughly practice, and by the time you are ready for real play, you will have the hardware itself.
Online Wheel Analysis Software: Many players are doing very well with it, and are finding it makes life much easier. We're doing a few small updates to make it even better. They aren't major updates, but while they are being done, there may be a few glitches in the software. I don't know how long it will take until the programmer informs me. But I expect it wont take longer than a week. Also when I get a spare second to finish the program specifications, the mobile phone software for data collection and integration with the online software will begin development (programming). Eventually, the mobile phone software will make application of the system (with bets before ball release) almost completely automated. Specifically you enter the data in the phone, and are told exactly where to bet. Unfortunately it realistically cannot be 100% automated, but it will be close to complete automation.
That's enough for one week. Have a good weekend.
Roulette Computers (Basic): For players who purchased the system with the free basic computer hardware, these will be shipped shortly. A few more than expected became players at that stage, so I MAY be a bit short on stock, which means some orders will be delayed about 2-3 weeks while I obtain more. But keep in mind you can download the actual SOFTWARE from the player only forum (www.genuinewinner.com/forum) and test on footage from my sites - install it on virtually any mobile phone. Don't expect to go out and play the first day anyway. First thoroughly practice, and by the time you are ready for real play, you will have the hardware itself.
Online Wheel Analysis Software: Many players are doing very well with it, and are finding it makes life much easier. We're doing a few small updates to make it even better. They aren't major updates, but while they are being done, there may be a few glitches in the software. I don't know how long it will take until the programmer informs me. But I expect it wont take longer than a week. Also when I get a spare second to finish the program specifications, the mobile phone software for data collection and integration with the online software will begin development (programming). Eventually, the mobile phone software will make application of the system (with bets before ball release) almost completely automated. Specifically you enter the data in the phone, and are told exactly where to bet. Unfortunately it realistically cannot be 100% automated, but it will be close to complete automation.
That's enough for one week. Have a good weekend.
Subscribe to:
Posts (Atom)